- Description
- Product Specs
- Installation
HandiFoam® Pro Adhesive low pressure one-component polyurethane foam adhesive spray is a moisture cured, multi-purpose adhesive designed to create an extremely strong, permanent bond between various types of building materials. After placement of the substrates, the foaming adhesive will expand to fill in small gaps and uneven surfaces.
Spray foam gun products result in less waste compared to straw foams. This foam glue spray is dispensed through a contractor grade gun for control and ease of use. The gluing polyurethane foam gun can be metered down which allows precise control of the flow output.
Partially used cans of foam adhesive spray may be stored on the gun for use up to 30 days later. Consult your gun's operating manual for cleaning and storage instructions.
Due to the expanding nature of HandiFoam® Pro Adhesive foaming adhesives, they result in much higher yield compared with traditional adhesives.
Specifications:
|
Technical Information:Operating Instructions:
|
Installation Tips:
-
Application: For best results as a foam adhesive, use a technique called "flashing" to adhere the foam shape to the substrate. Apply the polyurethane glue in a zig zag pattern onto the back of the foam shape to be adhered and then stick (flash) to the substrate and quickly remove. Allow the adhesive to set-up for 1 minute. Reapply the foam shape and hold in place.
-
Temperature: Spray foam products are temperature sensitive. You can spray this foam in colder outdoor temperatures, the key is to keep the core temperature of the can within the optimum range of 65-80°F.
-
Adjustable Flow: The HT300 and HT500 guns are equipped with a regulator screw that allows you to control the flow rate and adjust the bead size.
-
Larger Voids: If sealing voids 3" or larger, moisten with a spray bottle before foaming.
-
Safety Considerations: Our includes a tyvek suit with hood, respirator, goggles, and 2 pairs of nitrile gloves.
-
Clean Up: You can clean up uncured foam with . Clean gun tip after every use. Clean basket whenever changing cans. Once foam is fully cured, you will have to remove it by mechanical means.
